It’s webinar time! We hit max capacity of 200 registrants last time we did this webinar, and we want a better recording of it, so we are repeating it! (Already at 90 registrants from email announcement.)
Posts Tagged ‘spacing’
After we published the recording of our first webinar, David Vereschagin contacted us with the following comment:
Jimmy Gallagher commits a serious Fontlab error when attempting to demonstrate letterspacing and setting sidebearings in his “Beyond the Basics: Font Editing Tips and Techniques” webinar. (This starts at about the 50 minute mark in the recording.) He fails to remember that putting /H into the metrics window in Fontlab will not yield a display of a slash and an H, but simply an H itself. When he inputs H/H/H he thinks he is showing how his spacing system works, but is only showing a series of Hs. Worse, when trying to show the letterspacing of HOH he claims that the sidebearings on O are the source of the letterspacing problem, when it’s clearly the left sidebearing of the H that is off. Everyone who attended that webinar or purchased the recording is owed an apology and a correction.
Thanks! I certainly do apologize for the confusion. Using the slash glyph as a “spacer glyph” was possible in Fontographer 5.0 and earlier, but you won’t get away with that so easily in FontLab Studio or the newest Fontographer 5.2. Rushing to finish and trying to toggle between FontLab Studio and Fontographer tripped me up. Thanks so much for catching this — we can always use comments like this so that we can do better next time!
And here’s what happened in more detail…
Yes, it took only about 170 minutes from the time the announcement hit the web to fill all 23 of the available slots in Monika Bartels’ upcoming Fontlab tutorial webinar on hinting (“Hinting: The Design After the Design” on Tuesday, October 8, 11:00 AM). Who knew there was such a thirst for this arcane knowledge?
Certainly not us. We figured we might have trouble getting a couple dozen interested people together.
Of course we had a hint (pun intended). Just a week or so earlier Jimmy’s “Beyond the Basics: Font Editing Tips and Techniques” webinar had sold out in 9 hours. We sense a pattern.
So in view of the obvious demand we’re going to increase the available seats (retroactively even!) at our webinars. We were limited to 25 (but had to save a couple spots for the host and/or presenter), but now we’ve upped it to 200.
That means that if you tried to register for the hinting webinar but were told it was already full, or had problems with registration and it didn’t “take”, then you now have a “Get out of jail free” card. Just go back to the registration URL (http://www.anymeeting.com/PIID=E958D688864638) and sign up and it should let you in with no problems. As long as we stay under 200 people 🙂
This even applies to people who wanted to get into Jimmy’s first webinar (“Beyond the Basics — Font Editing Tips & Techniques” on Tuesday, September 17). Of course you can’t go back in time and participate, but we did make a recording. Until today you couldn’t view the recording because it was limited to only the original participants. But our new 200 limit now applies to that recording as well, so you can go back to the original registration URL (http://www.anymeeting.com/PIID=E958D980844F3D) for that webinar and sign up and you’ll get to see Jimmy explain all about the optical illusions of type design and a bunch of other neat stuff.
Just about an hour ago I sent out the invitations for Jimmy’s next webinar, “Son of Beyond Basics”. In this sequel der Fontmeister will go a bit further into the mysteries of type design and reveal even more tips and techniques — and answer questions. It will probably be about half new stuff and half a recapitulation of the most important points from the first Beyond Basics webinar. The registration URL is http://www.anymeeting.com/PIID=E958D688854F3D
One caveat about registering: AnyMeeting (the webinar system) seems to have a little problem with some browsers — especially if popup blocking is enabled. So if you’re using Chrome or Safari it would be a good idea to turn off the popup blocker. And if that doesn’t work then try Firefox or Internet Explorer.